Can two iSCSI LUNs be provisioned in FreeNAS 9.3
NorCalTechSupport Explorer. Preview Exit Preview. The good news is all 3 methods work. While both allocate space on demand, there are significant differences between them in terms of both operation and performance.
My method of last resort would be to take one of the LUNs offline and delete it, but would that free up the space and allow the others to expand in size?
Posted: Fri Jun 12, Taking 3 luns, pm.
Adding LUNs for Storage Space Expansion - OceanStor VR Administrator Guide - Huawei
If you have available or can free space in the aggregate, Taking 3 luns, you can grow the volume size. Labels or serial numbers stored in a logical unit's storage volume often serve to identify the logical unit.
Thanks a lot for your valuable solution and suggetion. As this is critical migration for me and you have done a good analysis.
HPE Storage Users Group
Users browsing this forum: Google Taking 3 luns and 32 guests. Previous topic Next topic, Taking 3 luns. However, the LUN is the only way for an initiator to address a command to a particular logical unit, so initiators often create, via a discovery process, a mapping table of LUN to other identifiers. Richard Siemers. This article may have been automatically translated. Or would that even be worth it?
Context sensitive: The LUN identifies a logical unit only within the context of a particular initiator. LUN vs.
You should upgrade or use an alternative browser. Home Support Knowledge Base Article.
Adding LUNs for Storage Space Expansion
If you enable FAST, this problem will be resolved during subsequent relocations. Possibly delete snapshots on volumes with LUNs.
Post Reply. Joined Aug 25, Messages Taking 3 luns My problem is the Thin provisioned virtual HDD become Thick provisioned during all three methods of migrating old to new. If you have any feedback regarding its quality, please let us know using the form at the bottom of this page.
View solution in original post. Status Not open for further replies. See The Solution. To delete all Snapshot copies on a volume, Taking 3 luns, use the -a parameter. Hoping someone can help. Or some alternative way to access the data on the disks?